SHYLENDRA ELECTRONICS

​5kV Insulation Tester                                                                                                    
  • Voltage range 250 V to 5000 V in selectable steps
  • Resistance measurement up to 10TΩ
  • High noise immunity
  • Various tests like Polarization Index (PI), Dielectric Absorption Ratio (DAR),
    ​Dielectric Discharge (DD), Step Voltage (SV) test and
  • Breakdown Voltage (BDV) test
  • Ingress Protection IP54
  • Mains cum Battery operated
  • Advanced .NET based software for storing & trending of results.
  • USB & RS-232 communication ports

 ​Winding Resistance Meter                                                                                                
  • 4½ digit display for resistance measurement
  • Seven measurement ranges
  • Dual channel resistance measurement
  • Data management software
  • Heat run test mode as per IS 2026 Type your paragraph here.


Multimeter - cum - Insulation Tester

  • ​Multi featured single box design

  • Selectable Voltage 50/100/250/500/1000V

  • Wide IR range upto 6 G.Ohms

  • Industrial grade TRMS multimeter function

  • Voltage measurement upto 1000V AC/DC

  • Dual display LCD with amber light

  • AC/DC current, capacitance, resistance, frequency, diode test


Sub-Station Test set - Capacitance & Tan Delta test kit

  • Fully automatic
  • ​Tan Delta, capacitance, dissipation factor measurements
  • Output voltage up to 12 kV
  • Variable output frequency: 15 - 500 Hz
  • Primary injection testing capabilities: up to 800 A or up to 3000 A, with the
    optional module BUX 3000
  • 2000 V AC high-pot test
  • Local control by large graphic display
  • High DC current micro-Ohmmeter test
  • Winding or burden resistance measurement


Relay Test kit  

  • Testing all relay technologies: electromechanical, solid state,
    ​numerical and IEC61850 
  • Manual control with color display
  • Simultaneously available: 6 Current and 4 Voltage plus 1 battery simulator outputs
  • High current outputs: 6 x 32 A, 3 x 64 A,1 x 128 A
  • High power outputs: 6 x 430 VA, 3 x 860 VA,1 x 1000 VA
  • High accuracy outputs: better than 0.05%
  • IEC61850 protocol interface
  • USB, Pendrive and Ethernet interface
  • Advanced testing and data management software TDMS
  • Complete library of relays from the major manufacturers


Automatic Primary Current Injection System (Electronic)

  • Fully automatic
  • High current output: up to 2000 A, 3000 A and 5000 A
  • Two portable units: control and current units
  • Variable output frequency: 15 - 500 Hz
  • CT ratio, burden and polarity test
  • Step & touch plus ground resistance tests with STLG option
  • IEC 61850-9-2 sample values protocol interface
  • Reduced timing test
  • Large graphic display
  • The software performs various tasks, such as:
  • . Controls e KAM from PC,  Create test plan, Download stored test results via Ethernet cable
  • . Create and customize test reports, Print test results


HV Detectors - Non Contact type

  • HV-50 - 6.6kV - 33kV
  • HV132 - 11kV - 132kV
  • HV220 - 33kV - 220kV
  • HV440 - 66kV - 440kV
  • Indicates presence of 'high voltage' by audio-visual indication
  • Non contact probes
  • Self test button
  • Type tested at CPRI & in use by various ESCOMS
  • Insulated stick of 3 mtr & 5 mtr

Circuit Breaker Analyzer

  • Faster: one single connection set up to perform automatically all possible
    Circuit Breaker tests
  • Safer: Both Side Grounded feature without any additional external
    boxes/modules
  • Three/Six/Nine static and dynamic contact resistance measurement
    ​– 200A DC output each
  • Three phase first trip measurement
  • 16 or 24 fully user configurable Main/PIR and auxiliary input contacts
  • 2, 4 or 6 Open / Close coil commands
  • 3 analog linear/rotary transducers and 3 digital transducers inputs for travel/ speed analysis
  • 8 analog input measurements: battery voltage, motor current, pressure transducers and other measurements